MCC MIIC-203 Betriebsanweisung PDF herunterladen (Seite 59)

Low Level Response: /XCC0000[CR]

Master read three bytes from slave address 0x4F. First two bytes are acknowledged

by master.

Command: /X S ~4f Rrr P [CR]

Response: /XCCA~xx~xx~xx[CR] ‘(xx = 00...FF)

Master transmit a Write WCR command to a Xicor X9241 at slave address 0x50.

WCR data is 0x00.

Command: /X S ~50 ~a0 ~00 P [CR]

Response: /XCCAAA[CR]

Master transmit a Write WCR command to a Xicor X9241 at slave address 0x50.

WCR data is 0x3f.

Command: /X S ~50 ~a0 ~3f P [CR]

Response: /XCCAAA[CR]

Issue a Read WCR command to a Xicor X9241 at slave address 0x50.

Command: /X S ~50 ~90 ~R P [CR]

Response: /XCCAA~xx[CR] ‘(xx = 00...FF)

Issue an Increment Wiper command to a Xicor X9241 at slave address 0x50.

Command: /X S ~50 ~20 1 P [CR]

Response: /XCCAA[CR]

Issue an Decrement Wiper command to a Xicor X9241 at slave address 0x50.

Command: /X S ~50 ~20 0 P [CR]

Response: /XCCAA[CR]

Display Tx bYte Count (requires firmware V2.00+)

Returns the number of bytes received by the slave device in the last master transmit

message.

1 2 ... 54 55 56 57 58 59 60 61 62 63 64 ... 70 71

Keine Kommentare

MCC MIIC-203 Betriebsanweisung Seite 59