MCC MIIC-203 Betriebsanweisung PDF herunterladen (Seite 67)

The received text is a representation of the data bytes within the Slave Receive

message. The format of this data is controlled by the current setting of the Hex Only

Display Control.

Prompt: /GRCtext[CR] ‘General Call Receive Complete

Command: None Required

iPort/USB Ready

Prompt: * ‘iPort/USB Ready

Cause: iPort/USB is ready for the next Host command.

Slave Not Acknowledging

Prompt: /SNA[CR] ‘Slave Not Acknowledging

Cause: There is no response (I

C Slave Address Acknowledgment) during a Master

Transmit or Receive operation from an I

C Slave device at the current Destination

C Address.

iPort/USB Busy

Prompt: /I81[CR] ‘iPort/USB Busy

Cause: The host computer attempted a Master operation while iPort/USB was busy.

The host computer should wait for any previously issued command to complete,

process any pending slave events, and retry the last command.

C Bus Arbitration Loss

Prompt: /I83[CR] ‘I

C Arbitration Loss Detected

Cause: iPort/USB lost I

C Bus Arbitration to another bus master device while

Master Transmitting or Master Receiving an I

C message. Host should process any

active slave events and repeat the last command.

C Bus Error Detected

Prompt: /I84[CR] ‘I

C Bus Error Detected

1 2 ... 62 63 64 65 66 67 68 69 70 71 72 ... 76 77

Keine Kommentare

MCC MIIC-203 Betriebsanweisung Seite 67