MCC MIIC-203 Betriebsanweisung PDF herunterladen (Seite 41)

Basic Set Up Screen

5.1.3 Establish Adapter Communications Link

On the main screen, click the Open button to view the Set Up Screen. Three levels

of setup options are available, Basic, Advanced, and Diagnostic. Only Basic setup is

required.

5.1.3.1 Basic Setup

Use the “ComPort” control to select the communication port connected to the I

adapter. If an iPort/USB is selected, the serial number for the selected adapter is

displayed (Win 2000, XP+ only). In addition to RS-232 and iPort/USB adapters,

Message Manager supports USB and network connected local or remote RS-232

ports via the Windows Com driver.

Select from the list of available baud rates. Then click OK.

After a few moments, the Communication Events window on the Main Application

screen should report “I

C Open Successful.”

If open is not successful, follow the on-screen instructions. Make sure the

communications port is working, is enabled in the Windows Device Manager, and

is not being used by other software. Additional communication port open

information is available in the log file. See Diagnostic Setup options.

1 2 ... 36 37 38 39 40 41 42 43 44 45 46 ... 76 77

Keine Kommentare

MCC MIIC-203 Betriebsanweisung Seite 41